Lüdenscheid, May 2025 - intec Gesellschaft für Informationstechnik mbH, German innovation leader in the field of telecommunications measurement technology, will be presenting its high-performance ARGUS® F series at ANGA COM in Cologne. The trade fair is regarded as the leading business platform for broadband and content providers – the perfect stage for presenting our future-proof fiber optic solutions.
The ARGUS® F series – consisting of ARGUS® F200, F240 and F300 – has been specially developed for the installation, commissioning and maintenance of optical networks such as GPON and XGS-PON. The devices are characterized by precise measurement results, practical functions and a clear focus on European operating conditions - ideal for modern fiber optic infrastructures.
ARGUS® F200 – The Basic Fiber Tester
The ARGUS® F200 is a specialized selective power meter for GPON and XGS-PON networks. It enables measurements at three or optionally four or five wavelengths and can be switched into existing PON connections in through mode. This allows the optical levels on the different downstream (OLT) and upstream (ONT) wavelengths for GPON and XGS-PON as well as that of a possible video overlay (1550 nm) to be precisely determined simultaneously via five separate filters. This is particularly relevant for TV transmission via fiber optics. In addition, other transmitters that may be on the line (Alien-ONT) can be detected and the PON ID can be read out from PLOAM messages. A PLOAM monitor scans all ONU IDs and serial numbers of connected ONTs. An Optical Loss Test Set (OLTS) is optionally available, which enables the calculation of signal losses in fiber optic cables and thus evaluates the quality of data transmission.
ARGUS® F240 – The Fiber Tester
In addition to the functions of the F200, the ARGUS® F240 offers a complete ONT simulation with IP and performance tests up to 10 Gbit/s. Additional test functions such as WLAN analyzer, WLAN speed tests via WiFi6e, triple play tests such as VoIP, IPTV and data tests in the form of uploads/downloads, ping and traceroute as well as iperf or high-performance IP speed tests directly on the fiber or Ethernet are integrated. The optional OLTS can also be used here for precise attenuation calculation.
ARGUS® F300 – The Universal Fiber Tester
The ARGUS® F300 simplifies commissioning and troubleshooting in fiber optic networks. The integrated OTDR automatically detects splices, connectors and cable faults and displays the results clearly. Thanks to automatic measurement configuration, operation is particularly easy - ideal for beginners. At the same time, the expert mode allows precise settings for professional users. The ARGUS® F300 thus combines ease of use with the highest measurement quality in the field.
The ARGUS® F300 is the only device in the world that can combine an OTDR with a selective OPM and determine and display both the PON ID and the XGS-PON ID. In addition, the ARGUS® F300 offers a complete ONT simulation with IP and performance tests up to 10 Gbit/s as well as extensive test functions such as WLAN analyzer and triple play tests. The optional OLTS extends the possibilities for attenuation measurement and quality assessment of fiber optic connections.
All devices in the F series have an SFP slot that can be used for Active Ethernet (AON), as is often the case in FTTH installations. It also enables comprehensive verification of the network transfer point of a PON connection. This allows network operators and end customers to use their preferred terminal devices without restrictions and make the best possible use of the fiber optic connection.
The Fiber Inspection Tool can also be connected via USB, which inspects the cut surface of a fibre optic cable at the connection point for scratches and defects and displays these as a video image and in tabular form.
The ARGUS® Mobile App is available for all devices in the ARGUS® F series. It can be used to conveniently transfer and manage measurement results on mobile devices. This makes the documentation and analysis of measurement data considerably easier and offers a flexible option for optimizing work processes.
“With the ARGUS® F series, we are taking measurement technology to ANGA COM that has been specially developed for the requirements of the European market - Made in Germany, with close proximity to the customer,” says Markus Tix, Managing Director of intec GmbH. “What sets our devices apart is the combination of maximum precision, intuitive operation and practical functions such as Remote Assist, central results management and the ARGUS® Mobile App. Network operators and technicians benefit noticeably in their day-to-day work: faster processes, on-site support, fewer sources of error and short repair and calibration times. At the same time, regular software updates ensure that our solutions will continue to keep pace with increasing requirements in the future. For us, this is exactly what future-proof measurement technology is - simple, reliable and always to the point.”
We cordially invite you to visit us at the ANGA COM in Cologne from June 3 - 5. Experience the ARGUS® F-Series live in action in Hall 8, Stand A71 and discover how our measurement technology makes your work in fiber optic networks faster, safer and more efficient. We are offering you new entry-level prices for the ARGUS® F300 and attractive trade fair prices for all F-Series devices.
Further information on the ARGUS® F Series.
back to overview
