F200
The ARGUS F200 is a specialised selective power meter designed for use in GPON and XGS-PON networks. It supports measurements at two, or optionally four or five, wavelengths.
The Basic Fibre Tester
The ARGUS F200 is a compact fibre-optic tester designed for installation, commissioning and fault-finding in GPON and XGS-PON networks. As a selective optical power meter (OPM), it enables the measurement of optical levels and the determination of attenuation at fibre-optic connections. With a boot time of just 16 seconds, a touchscreen, a clear tile-based menu system and customisable favourites, frequently used measurements can be carried out quickly and easily.
Depending on the configuration, the ARGUS F200 supports selective level measurement at two, four or five wavelengths. In Through Mode, the selective 4xOPM allows the optical levels of the downstream and upstream signals from GPON and XGS-PON to be measured simultaneously. Furthermore, external transmitters (alien ONTs) can be detected and the PON ID read from PLOAM messages. The PLOAM monitor records ONU IDs and serial numbers of connected ONTs. The 5xOPM also enables a video overlay across five separate filters.
Further measurement functions are available for the acceptance testing and verification of fibre-optic links. The optional Optical Loss Test (OLTS), featuring a light source for two or four wavelengths, enables attenuation measurements. The PON-FMT function in accordance with ZTV 43 supports guided PON acceptance testing with automatic target value calculation, target-actual comparison and OK/nOK evaluation.
In addition, the ARGUS F200 offers WLAN management as well as the option to connect a fibre inspection tool for testing fibre optic connectors. This allows contamination, scratches and defects to be detected and documented.
Selective power meter for PON
The ARGUS F200 specifically measures individual wavelengths in GPON and XGS-PON networks.
Through Mode and PON ID
In Through Mode, downstream and upstream levels are determined simultaneously. The PON ID can be read from the PLOAM message.
Compact for field work
A quick boot time, a tile-based menu, direct tests and a customisable favourites view allow you to start taking measurements straight away.
Acceptance in accordance with ZTV43
PON-FMT, in accordance with ZTV43, supplements guided acceptance measurements with setpoint calculation and a pass/fail assessment.
Interfaces and measurement functions
The ARGUS F200 can be configured for different networks and measurement tasks. The following overview shows which interfaces and functions belong to the base unit and which are available as optional equipment.
Fibre-optic cables and PON
Depending on the basic package, different OPM variants (2x, 4x or 5x) or a combination of OFL and 3xOPM are included.
- GPON Included
- XGS-PON Included
- Selective xPON OPM Included
- xPON-ID Included
- PLOAM Monitor Included
- ONT simulation Optional
- PON-FMT in accordance with ZTV 43 Optional
- Fibre Inspection Tool Optional
- Optical Light Source Optional
- Optical Loss Test Set Optional
- Visual Fault Locator Optional
- Selective 2xOPM Depends on configuration
- Selective 3xOPM Depends on configuration
- Optical Fault Locator Depends on configuration
- Selective 4xOPM with Through Mode Depends on configuration
- Selective 5xOPM with Through Mode Depends on configuration
WLAN and services
WLAN management is included as standard. Cloud services and configuration import are included.
- WLAN management Included
- FW Update Included
- Configuration Import Included
- Upload of measurement reports Included
- Cloud services Included
- Remote access (VNC) Included
- PC software Included
- ARGUS Mobile App Included
- ARGUS pedia Included
Areas of application
Acceptance and documentation
Measurement logs, HTML reports and cloud connectivity facilitate acceptance testing without the need to transfer values manually at a later stage.
Fault clearance
If faults occur on a live network, optional tools such as TDR, line monitor, OTDR or PON measurements can help – depending on the device configuration.
Installation and commissioning
Technicians check the new connection on site, document the interfaces and provide the network operator with a clear set of measurement results.
Downloads
Datasheets, manuals and further documents for this device.
Datasheets
Manuals
Firmware
PC software
Brochures
Technical articles
Accessories and add-ons
Extensions
Accessories
Manuals
Item no.: var.
Calibration Test Certificate
Item no.: 090050
SC/APC 8°-LC/APC 8° test cable
Item no.: 020040
SC/APC 8°–SC/APC 8° test lead
Item no.: 020042
SC/APC 8°-SC/UPC test cable
Item no.: 020041
SC/UPC attenuator
Item no.: 020050
USB-C switching power supply
Item no.: 020008
Carry Bag 4
Item no.: 007005
Carry bag 5
Item no.: 007002
